CATEGORIES

Cots / Beds / Body Bags
AED's - Defibrillator
Airways
Ammonia Inhalants
Aspirators (suction)
Backboards / Spineboards
Bag Valve Mask (BVM) Resuscitators
Bags (equipment)
Bandages and Dressings
Betadine Solution
Bleeding Control/ Tournequettes
Blood Pressure Cuffs
Burn -Sting - Scrape Relief - Safetec
Cannula, Nasal
Cervical Collars
Cleaning -Disinfectant- Spill Control Products - Safetec
CPR Masks/Equipment
Diabetic Supplies
Diagnostic Equipment
Disinfectants / Spill Containment
Emblems & Patches
Emergency Packs
EMT Bandage/Utility Scissors
Eyewash and Burn Care Stations
First Aid Kits - firstresponsesupplies
Flashlights
Forceps
Gloves
Heating Blankets
Holster Sets
Home Health Items
I V Start Kits and Supplies
Masks / Barriers
New Products, First Responder Supplies
OB Kits
Oral glucose (Insta-Glucose)
Pouches and Cases (EMT)
Power Supplies- First Responder
Protective Eyewear
Radios & Communications
Reference Materials/Notebooks/Pads
Rite in the Rain All-weather writing paper and accessories
Safety/Emergency Equipment
Seat Belt Cutter
Sheets - Blankets - Disposable Linen
Splints ,Wraps, Kinesio Tape
Sterilization Testing/ Compliance Products
Stethoscopes
Tongue Depressors
Tools
Warning Devices, Flares, Cones, Signs
700 East Shawntel Smith Blvd.
Muldrow, OK 74948-1376
Phone (918) 427-3600
Fax (918) 427-3214
Home  ::  New Products  ::  Search Our Site  ::  Contact Us 
Backboards / Spineboards
Pro-Lite Spinal Immobilization Equipment
Rapid Deployment Products is the premier manufacturer and supplier of spinal immobilization products. These products were designed by professional EMT's and Paramedics and perform at a higher standard than normal.

Other Pro-Lite products are available upon request, including additional straps and head immobilization devices. These products are drop shipped to you direct from the factory. Prices shown do NOT include shipping and handling (S&H). Custom graphics and lettering on boards is available.
Categories | Backboards / Spineboards  
Displaying 1 through 9 of 9 products.


Multi-Grip Head Immobilizer  
Product Code: MM????? 
Multi-Grip Head Immobilizer
The MultiGrip is lighweight, easy to apply and is buoyant for water rescue. Individually packaged in thermo-sealed film. The system comes complete with head and chin strap.

Features:
  • Strong
  • Lightweight
  • Water resistant
  • X-ray and CT Scan Transparent
  • Compatible with all Backboards and C-Collars
  • Adjustable
  •  
      
    Price: $6.25
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Eco Spineboard  
    Product Code: PL719 
    • 500 lb patient weight capacity
    • Seamless design prevents fluids from entering and eliminates cross-contamination
    • Two boards can be nested together in less than 4" of space with the head immobilizer attached
    • Flotation capabilities of 300 lbs.
    • Weight: 15 lbs.
    • 72" X 16" X 2-1/4"
    • 100% x-ray translucent between hand holds
    • Available with or without speed clips
    • 100% guarantee of workmanship under normal usage, guaranteed for life
    • Guaranteed 100% x-ray translucent between hand holes
    • Available custom 2" graphic black letters, guaranteed for the life of the board
    • Custom logos and graphics are available and guaranteed for the life of board
    • Reflective strips on edge of the board are optional
    • Custom colors available $10.00 per Board - Standard Color YELLOW
    • Delivery of in stock colors: one week
    •  
    • Specify your choice with or without pins
    • Specify Premium Color Choice (Tactical Black, Neon Green, Dayglo Orange, Red, or White)
     
      
      
    1-2 3 +
    $99.50   $109.95  
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Lite Head Immobilizer  
    Product Code: PL716HI 
    • Closed cell foam construction of the pillows and straps provides excellent support and comfort to patient. Plastic coating is waterproof and cleans and disinfects easily.
    • The Base Plate is made of a High Density Molded Plastic that is impervious to all fluids. Simply Snap the Base Plate at the top of the PRO-LITE? Backboard by aligning the three nodes with the corresponding holes on the Backboard; place the palm of your hand on the Base Plate Velcro and squeeze the side nodes through the holes on the Backboard until they snap in place. Finally, insert the top node into the hole.
    • The Head Immobilizer may be stored while attached to the backboard. If removing the Head Immobilizer from the backboard, pop the sides out first. Do not pull back on the top to remove.
    • The Head Immobilizer pillows have large ear holes to aid in monitoring the patient's blood loss or fluid drainage. No metal parts are used in any of the components.
    • The unique snap on - snap off feature prevents loss or movement during street or aquatic procedures. All components are buoyant, making it ideal for water rescue.
    • Weighs less than 2 pounds.
     
    1-2 3 +
    $174.50   $143.50  
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Lite speed clip strap set  
    Product Code: PL700SC 
    3 sets required per board  
    Price: $15.50
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Lite Speedboard  
    Product Code: PL710 
    Do you perform "Rapid Take Down" on almost every patient? Can you clinically justify this practice?

    "Rapid Take Down" is intended to be reserved for the multi-system trauma patient with low blood pressure. You do it anyway because the short spine devices most widely available were designed decades ago, in the day of bench seats and big cars. They just do not work well in today's bucket seats. They are nearly impossible to clean, disinfect and just take too long to apply. Why place your patient at risk of permanent disability when now you can do the job right without compromise?

    Pro-Lite Speedboard is the answer ...
    Applying the Speedboard to a victim... (instructions).  
    Price: $189.00
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Lite Spineboard  
    Product Code: PL716 
    • Seamless design prevents fluids from entering and cross contaminating
    • Unlimited single-patient weight capacity
    • Weight 11.5 lbs
    • 72" long, 16" wide, only 2-1/4" thick
    • Tapers from 16"to 14" at foot end
    • Contour grip offers rescuer comfort on all 16 of the 2" x 5-1/4" holds
    • Offers better patient centering and requires much less padding
    • With the unique design, two boards can be stored together in less than 4" of space
    • Foot section is angled slightly downward to assist rescuer in auto extrication
    • Only board that provides natural curvature of the lower extremities
    • Spinal injury can be diagnosed before the patient is removed from the spineboard
    • Compatible to all head immobilization devices
    • NOTE; BOARD MUST BE ORDERED WITH "PINS" TO USE STRAPS AND SPEED CLIPS
     
      
      
    1-2 3 +
    $175.00   $149.00  
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Lite strap set (3 set)  
    Product Code: PL700DS 
    1-5 6 +
    $16.95   $17.50  
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Lite velcro strap set  
    Product Code: PL700VS 
    Price: $39.95
    Shipping: $5.95
    Qty 



    Pin It
     


    Pro-Lite XT Spineboard  
    Product Code: PL717 
    • Seamless design prevents fluids from entering and contaminating
    • 72" long, 16" wide, only 2-1/4" thick Weight 14 lbs
    • Weight capacity is unlimited
    • 100% x-ray translucent between hand holds
    • UV stable
    • Compatible to all head immobilization devices
    • Contour grip offers rescuer comfort on all 16 of the 2" x 5-1/4" holds
    • Concave design offers better patient centering & requires much less padding
    • Only board that provides natural curvature of the lower extremities

    Specify with your order Color Choice and selection of with or without pins

     
      
      
    Price: $170.00
    Shipping: $5.95
    Qty 



    Pin It
     
    Displaying 1 through 9 of 9 products.

    Copyright 2009, B & A Products

    Links

    Tulsa Web Design by Ambitious Web